The New Orangatang Moronga Longboard Wheel!

Orangatang Moronga

Orangatang Moronga

Guys and girls we are proud to present you with Orangatang’s newest wheel… The Orantatang Moronga! It is a center set freeriding dream-wheel! It has a 35mm contact patch and sits at 72.5mm tall. Like all of Orangatang’s other freeride inspired wheels, the Moronga comes with a stone-ground contact patch and beveled edges so right out of the package they are ready to shred! Their thin profile makes them very easy to kick out into slides. Usually this quality leads to unpredictable wheels that tend to slip out a little too easy but with the Moronga’s center set hub and Orangatang’s patented Euphorethane urethane compound these wheels are surprisingly delightful when getting sideways. Not to mention, since they are center set, you can flip them over as they start to cone, doubling the life of your wheels!

We got to check them out quite a while ago, in their prototype phases and were instantly in love. One of the things that we enjoy the most in regards to the Orangatang Moronga is how light they are. They are really fun on boards like the Tan Tien and Kanthaka. Basically anything with a kicktail, where you can do freestyle tricks, will pair up great with these bad boys. Its never fun to have a heavy wheel weighing your board down! AND once these guys wear down you can throw them on your mini-cruisers and they are extremely fun!

All around we are pretty much in love with these wonderful lumps of urethane and joy. Freeriders rejoice! Your wheel hath cometh! 

Freshly Paved… Fresh and Paving the way!

This level of shredding is pretty awesome. I feel like these dudes got their huge slides on lock very early and then decided to do stuff they hadn’t seen anyone do before. I am sure they are influenced by some bigger names out there but I feel like these guys are pretty original. Speaking of original I am pretty sure I saw the same original longboards prototypes in this video that I saw out at maryhill. And by prototypes I mean boards that will be coming out later this year or next year. Everything looked pretty solid! It really seems as if original is stepping their game up to stay current in the world of downhill and freeride, plus they got some shredders on board to back it up!

Juan Mercado!

Im not sure if many people know but we have been working on an ambassador program to  help spread the stoke. We are trying to hook up up and coming riders from all over the place. Here is one of our homies, Juan Mercado doing his thang, getting all sorts of fun stuff in the mix! Check him out in this fun little edit.

In this he is shredding a Landyachtz Wolfshark, DBS abec 7 bearings, Caliber Trucks, and some Abec 11 flashbacks!

IF you haven’t seen this…

You should probably be watching this cause Levi Green straight up SHREDS. He is officially on Abec 11‘s Green Team now. He is also getting the hook up from Rayne Longboards and you can see him rocking the Rayne Vandal . I would say that Levi is straight hooked up. He is also rocking Abec 11 Biltin bearings and Riptide bushings, which have been making quite a name for themselves lately. Gotta give those a look see.

We needed Photos….

Pete Benda with the Sector 9 Joel Tudor Mini

So we needed to get some photos so Pete and I went out after work and got out jimmy jam on. We set up a Sector 9 Joel Tudor Mini board with some Randal 150′s and some Abec 11/Sublime 62mm 100a Fernando Yuppie Powerslides. It was actually pretty freaking amazing.

Pete Benda with a BS board slide on this lil ledge

I realized that the Sector 9 Joel Tudor Mini Board is probably more of a park board rather than a street board, seeing as how it doesn’t have much concave… and well it isn’t a popsicle shaped deck either.  It has a nice pointed nose and a crazy square-pointy tail thing. Man its crazy fun though. But regardless of shape and size we have fun on this little thing here.

This wasn't even close to a land.

I was doing this little wall ride/slappy thing to 5-0 on here and Pete got a picture of this happening at one point. There is no way I was landing this seeing as how I wasn’t trying to do this at all but it opened up my mind to some tricks I want to get now. Like a slappy 5-0 to no-comply? Or a No-comply slappy to 5-0… the possibilities are endless!

This is more like it

Slappy type tricks are just fun. I like riding on these big Abec 11 wheels cause when you drop off the wheel and onto the hanger when doing a trick you can really feel it. The best part about this little session Pete and I had was that this ledge is so small and dorky but we had such a fun time messing around on it. Thats what I love about skating… doing stupid stuff, having a good time, and not being too concerned with everything being all perfect and in formation. I have to give some of the credit to this board set up though. That Joel Tudor deck is so sick! Sector 9 seriously did an awesome job on that one.

Pete getting a wiff of awesome

Pete FS Air

Then we found this amazing bank. It is the length of a tennis court and it is seriously phenomenal. We were skating it in pitch black though and so when the flashes went off you were basically left blinded. It was pretty sketchy but fun none the less!

Me - Alley-oop FS 180

One thing besides the board that I was stoked on was that the wheels we were skating were actually very durable. Usually power sliding on tennis courts is a surefire way to get flat spots. I was definitely doing power slides and still no flat spots on these Abec 11/Sublime Powerslides! 

Pete Backside Air on the Joel Tudor Sector 9

 

Another Day of Skating!

Check it out everyone. We have once again found ourselves up on some street skateboards and went and slayed some local spots.

Joe Kiser Starting off the Day with a stall to pull in on this bank.

Joe Kiser with a mean FS Boneless under a bridge!

Spencer took a break from behind the camera to get this backside flip

Joe Kiser with a man-sized melon out of a jenky piece of the sidewalk

Joe Kiser - FS Noseblunt

Joe Kiser - FS 5-0

Joe Kiser - FS hurricane

Joe Kiser - FS tailslide (Joe has over 20 something tricks on this)

 

 

Abec 11 / Sublime Fernando Yuppie 62mm Powerslides!

Abec 11 Wheels rock!

Setting up some Powerslides from Abec 11 / Sublime wheels.

Now, I’m not the best at techsliding, and when I say that I mean, I’ve never really done techsliding at all.  BUT I did grow up skateboarding and powerslides are definitely common place.  SO I decided to see how well the Sublime / Abec 11 Fernando Yuppie 62mm Powerslides actually performed.  At first I was actually confused because they are a slide wheel but they come with the tread grooved into them.  I feel like they would be more effective with no tread from the get go.

Finishing the wheels up.

And then the fun begins!  First few slides were rough but once I got the tread worn down the Fernando Yuppies were pretty fun!

Powersliding in a nice Alameda Ridge Driveway

Another slide up in the driveway!

Once you get these wheels worn in I can completely see why techsliding on them would be fun.  I was skeptical at first because I can pretty much flat spot any wheel out there.  Every wheel company out there claims that they have a “no flat spot” formula and the only wheels I haven’t ever been able to flat spot are Powell Bones STF‘s and SPF‘s.  BUT The Anti Flat Spot 100a urethane formula that Abec 11 uses in these is turning out to surprise me.  Im not quite sure how they did it because so many wheel companies like Spitfire, RIcta, OJ, have been out there forever making street wheels and yet Abec 11 was the ones who figured how to make a more durable wheel.  I bet a bunch of skateboarding companies would be pretty bummed out to know that a longboarding company is making a wheel that kind of puts theirs to shame!  Regardless, I am stoked because these wheels are going to be fun trying to wear down as much as possible.

Whats that sweet sticker on that car?

Turns out they are great for street skating too.  There really would be no reason for them not to be!  There was this little step nearby so I had to do a couple little stalls on it.

There was a little step nearby so I had to do some stalls on it. NosePick

Truthfully the shape is actually great for things other than just techsliding as well!  I know these are things that the world of longboarding arent too concerned with, however, I do have faith that more and more people will embrace all sides of skating and pick up a skateboard here and there as well!  The way the wheels cone in paired with how wide they are make them great for locking tricks in on ledges, coping, and whatnot.  The ones I have set up on here are still 62mm but once I get them down to about 58mm I will definitely be mashing around some parks on them.

Me Checking the wear on the wheelsYup, these wheels are rad

So all in all I gotta say that Abec 11 / Sublime Fernando Yuppie 62mm Powerslides are definitely a worthy purchase!  They slide great, they have a great shape, they are very affordable, and so far I have seen no sight of flat spotting.   Whether you are into tech sliding, street skating, or just want some beefy wheels on your deck, these wheels are definitely a great choice!  Good job Abec 11!!!!